This guide will explain how is done the control plane network configuration for the FIBRE's servers. For further information about how the network was designed, check the Architecture section.
For the FIBRENet's Control Plane was choosen the following network for the FIBRE's Islands:
As for netmask, it's obligatory to use 16 bits.
So as to segregate each Island's network, the Institutions receive an ID that correspond as the second octect used in the FIBREnet's control plane.
Host ID and Configuration
Quicklook for configuration
Servers and equipments
|netFPGA01OpenFlow Equipment #1||10.X.0.10/16|
|netFPGA02OpenFlow Equipment #2||10.X.0.11/16|
|netFPGA03OpenFlow Equipment #3||10.X.0.12/16|
|Pronto Switch OpenFlow Equipment #4||10.X.0.13/16|
perfSONAR01 (interface: eth0)
perfSONAR02 (interface: eth0)
Services' Virtual Machines
VM DNS and Monitoring System