Introduction
This guide will explain how is done the control plane network configuration for the FIBRE's servers. For further information about how the network was designed, check the Architecture section.
Network
For the FIBRENet's Control Plane was choosen the following network for the FIBRE's Islands:
| 10.X.Y.Z/16 | |
|---|---|
| X | Stands for the Institution ID. |
| Y | It's usually the defaul value is '0' for the third octect, but resources for experimentation like: Virtual Machines, Icarus Nodes and the OMF Portal will set another value. |
| Z | Stands for the host ID. |
As for netmask, it's obligatory to use 16 bits.
Institution ID
So as to segregate each Island's network, the Institutions receive an ID that correspond as the second octect used in the FIBREnet's control plane.
Due to federation reasons, the ID of the brazilian institutions begin at 128.
Institution | ID |
|---|---|
| NOC | 128 |
| UFRJ | 129 |
| UFPA | 130 |
| UNIFACS | 131 |
| UFPE | 132 |
| USP | 133 |
| UFF | 134 |
| UFSCar | 135 |
| RNP | 136 |
| UFG | 137 |
| CPqD | 138 |
| UFRGS | 139 |
| AMPATH | 140 |
| UFES | 141 |
| UFMG | 142 |
| UFU | 143 |
| UFBA | 144 |
| PUCRS | 145 |
| New Institutions | N + 1 |
Examples of ID usage:
| Instituition | Server (dom0) |
|---|---|
| RNP | 10.136.0.30/16 |
| USP | 10.133.0.30/16 |
| UFG | 10.137.0.30/16 |
Host ID and Configuration
Quicklook for configuration
Servers and equipments
Server | Endereço |
|---|---|
| ToR Switch | 10.X.0.1/16 |
dom0 | 10.X.0.30/16 |
| OpenFlow Equipment #1 | 10.X.0.10/16 |
| OpenFlow Equipment #2 | 10.X.0.11/16 |
| OpenFlow Equipment #3 | 10.X.0.12/16 |
| OpenFlow Equipment #4 | 10.X.0.13/16 |
perfSONAR01 (interface: eth0) | 10.X.0.60/16 |
perfSONAR02 (interface: eth0) | 10.X.0.61/16 |
Services' Virtual Machines
Server | Endereço |
|---|---|
VM LDAP | 10.X.0.50/16 |
VM VPN | 10.X.0.70/16 |
VM DNS and Monitoring System | 10.X.0.80/16 |
OCF Portal | 10.X.0.100/16 |
Flowvisor | 10.X.0.101/16 |
OMF Portal | 10.X.11.200/16 |