This guide will explain how is done the control plane network configuration for the FIBRE's servers. For further information about how the network was designed, check the Architecture section.
For the FIBRENet's Control Plane was choosen the following network for the FIBRE's Islands:
|X||Stands for the Institution ID|
|0||It's usually the defaul value for the third octect, but some services will require to set another value|
|Z||Stands for the servers ID|
As for netmask, it's obligatory to use 16 bits netmask.
So as to segregate each Island's network, the Institutions receive an ID that will stand as second octect used in the FIBREnet's control plane.
For historical reasons, the FIBRENet ID begins with 128.
|New Institutions||N + 1|