Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Introduction

This guide will explain how is done the control plane network configuration for the FIBRE's servers. For further information about how the network was designed, check the Architecture section.

Network

For the FIBRENet's Control Plane was choosen the following network for the FIBRE's Islands:

10.X.0.Z/16
XStands for the Institution ID
0It's usually the defaul value for the third octect, but some services will require to set another value
ZStands for the servers ID

As for netmask, it's obligatory to use 16 bits.

 

Network ID

So as to segregate each Island's network, the Institutions receive an ID that will stand as second octect used in the FIBREnet's control plane.

For historical reasons, the FIBRENet ID begins with 128.

Institution
ID
NOC128
UFRJ129
UFPA130
UNIFACS131
UFPE132
USP133
UFF134
UFSCar135
RNP136
UFG137
CPqD138
New InstitutionsN + 1

Examples of ID usage:

InstituitionServer (dom0)
RNP10.136.0.30/16
USP10.133.0.30/16
UFG10.137.0.30/16

 

 

  • No labels