Page tree
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

Introduction

This guide will explain how is done the control plane network configuration for the FIBRE's servers. For further information about how the network was designed, check the Architecture section.

Network

For the FIBRENet's Control Plane was choosen the following network for the FIBRE's Islands:

10.X.Y.Z/16
XStands for the Institution ID.
YIt's usually the defaul value is '0' for the third octect, but resources for experimentation like: Virtual Machines, Icarus Nodes and the OMF Portal will set another value.
ZStands for the host ID.

As for netmask, it's obligatory to use 16 bits.

 

Network ID

So as to segregate each Island's network, the Institutions receive an ID that correspond as the second octect used in the FIBREnet's control plane.

Due to federation reasons, the ID of the brazilian institutions begin at 128.

Institution
ID
NOC128
UFRJ129
UFPA130
UNIFACS131
UFPE132
USP133
UFF134
UFSCar135
RNP136
UFG137
CPqD138
New InstitutionsN + 1

Examples of ID usage:

InstituitionServer (dom0)
RNP10.136.0.30/16
USP10.133.0.30/16
UFG10.137.0.30/16

Host ID and Configuration

Servers and equipments

Server
Endereço

dom0

10.X.0.30/16

Perfsonar1 (eth0)

10.X.0.60/8

Perfsonar1 (eth1)

10.X.0.62/8

Perfsonar2 (eth0)

10.X.0.61/8

Services' Virtual Machines

Server
Endereço

LDAP       

10.X.0.50/8

Perfsonar1 (eth0)

10.X.0.60/8

Perfsonar1 (eth1)

10.X.0.62/8

Perfsonar2 (eth0)

10.X.0.61/8

Perfsonar2 (eth1)

10.X.0.63/8

VM VPN     

10.X.0.70/8

VM ZenOSS  

10.X.0.80/8

Portal OMF

10.X.11.200/8

Portal OCF

10.X.0.100/8

  • No labels